PPS body, 0 - 5 VDC output, 3-1/2 digit LCD informs the user of the actual flow rate
Series TFP-GI Gas Turbine Flow Meters are suitable for a wide variety of industrial, commercial, and laboratory flow applications. These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 - 5 VDC output signal for recording and data logging. A 3-1/2 digit LCD informs the user of the actual flow rate. A power adapter or mating cable assembly is required for operation.
Service | Clean dry gases compatible with wetted materials |
Wetted Materials | PPS, acetal, sapphire, glass, epoxy, and fluoroelastomer |
Accuracy | ± 3% of full scale |
Linearity | ± 3% of full scale |
Repeatability | ± 0.5% of full scale |
Temperature Limits | 41°F - 131°F (5°C - 55°C); Storage: 32°F - 158°F (0°C - 70°C); Sensitivity: ± 0.2% of full scale per °C |
Pressure Limits | 40 PSIG (2.8 Bar) |
Process Connection | Compression fitting, see Catalog page |
Power Requirements | 11.5 VDC - 15 VDC |
Power Consumption | 35 mA @ 12 VDC |
Output Signal | 0 VDC - 5 VDC: Minimum 2.5 kΩ load |
Electrical Connections | Four-pin power and signal connector. A power adapter or mating cable required for operation. See Accessories page |
Display | LCD, 0.39 in (10 mm) digits (only in LPM) |
Enclosure Rating | IP10 (NEMA 1) |
Weight | 0.23 lb (101 g) |
Agency Approvals | CE |
View All Part Numbers